Showing 1–24 of 27 results
-
- The AP series 6″ submersible pump can work under harsh conditions such as abrasive waters.
- Impellers and diffusers manufactured in Noryl. Shaft and pump body in stainless steel. Internal check valve included.
- 3 phase, 230/460V, 575V
- Pump shaft and shell made of 304 stainless steel
- Discharge = 3″
- Internal check valve included
MADE in CANADA
-
Armstrong 4x4x10 series 4300 vertical in-line pump
- Newly rebuilt
- Bronze impeller
- Viton mechanical seal with flush line
- 20HP motor.
Excellent for HVAC systems.
-
- Bracket, discharge head, external check valve, shaft, discs and pump housing are all made of stainless steel.
- Impellers and diffusers manufactured in Noryl. Shaft and pump body in stainless steel. Internal check valve included.
- 3 phase, 230/460V, 575V
- Pump shaft and shell made of 304 stainless steel
- Discharge = 3″
- Internal check valve included
MADE in CANADA
-
- New thermoplastic FLT pump feature an improved design that delivers better performance and durability, for pumps that pass the most stringent long-term-reliability tests with flying colors.
- Bracket and discharge head made of thermoplastic. Internal check valve, shaft, discs and pump housing are all made of stainless steel.
- Single phase, 115/230V
- Monophase or triplephase, 2 wire + ground, or 3 wire + ground starting at 1/2 H.P. all the way up to 5 H.P. (6 G.P.M. to 25 G.P.M.)
MADE in CANADA
-
- The FP 4″ submersible pump will provide efficient and reliable performance.
- Impellers and diffusers made of polycarbonate. Shaft and pump body in stainless steel. Internal check valve included.
- Single phase, 230V, 3 phase 575V
- Discharge – 2″
- Control box included with 3 wire motor
MADE in CANADA
-
Pressure Pump
- Maximum inlet pressure: 125 psi
- Maximum fluid temperature: 165°F
- Pump dimensions: 9,3″ x 8,3″ x 5,4″
- Maximum inlet vacuum: 9′ water (7,9″ Hg)
- Crankcase oil capacity: 15,2 oz
- Flow rate 4,00 GPM
- Operating pressure LB / PO2 1 100 psi
- Power 3,0 hp
- Maximum pump speed 1 750 rpm
- Shaft diameter 0,945″ / 24 mm
- Inlet port thread 1/2″ – 14 BSP-F
- Discharge port thread 3/8″ – 19 BSP-F
- Bore 0,787″ / 20 mm
- Stroke 0,394″ / 10 mm
-
18GBS3018Q4 Stainless Steel, 15 Stages pump
Applications:
- Residential, commercial or agricultural pressure wash
- Reverse osmosis
- Evaporative cooling systems/misters
- Booster Service
- Spray systems
- Water Circulation
- Filtration
- HVAC
- General Purpose pumping
Download the Model GB Manual
-
Brand New – Goulds Non-Clog Dual Seal Submersible Sewage Pump
- 3SD52J5AAH, 3SD Series, Cast Iron Housing
- 3″ Discharge, Flange Connection
- impeller size 8”
- 5 HP motor
- 3-Phase, 60 HZ, 575V, 1750 RPM, 6.8 Max Amps
- 2-1/2″ Max Solids
Read the Brochure
-
- Rating 1/25 HP, Pump Body Material Cast Iron,
- Voltage Rating 115 Volts,
- Phase. Single,
- Full Load Current 0.74 Amp,
- Thermal Protection Auto, Maximum.
- Temperature 230 Degrees Fahrenheit
- Speed 2590 RPM,
- Pipe Size Return In 1 1/4 Inches,
- Pipe Size Supply In. 1 1/2 Inches,
- Flow @ 11 Feet of Head 7.7 GPM
-
Available models
- SEMI‐ROTARY HAND PUMPS
- BATTERY PUMP 2 x “D” batteries required (not included)
- SIPHON PUMPS
- PITCHER PUMPS
- 45 GAL. DRUM PUMPS
- QUART STROKE OIL PUMP
- DRINKING WATER PUMP
-
- The JSS shallow well pump is the perfect pump for a summer cottage or even a country house.
- The pump body is made of stainless steel and the motor housing is made of aluminum giving it a much better heat dissipation when needed.
- Single-phase 115/230V
- 304 stainless steel body
- Suction until 25 feet of depth
- Pressure switch and pressure gauge are included and assembled.
MADE in CANADA
-
- The high‐precision impeller assures the MJ models an optimum efficiency. To eliminate all vibrations, the impeller is screwed to the shaft of the motor.
- Single-phase 115/230v, 3450 RPM, automatic thermal protection and stainless steel shaft
- 0 – 100 PSI pressure gauge
- Pressure switch set at 30 to 50 lbs/in2
MADE in CANADA
-
-
- 2” discharge
- 2HP motor @ 230V
- 60 Hz, single phase
- 3450 RPM
- 2” solid handling
- 20” cord lg.
- Vortex impeller
- Single seal
- Liquid temperature 104° (40° C).
-
- Used for applications such as lawn sprinklers, oversupplying systems, irrigation or for filling tanks.
- Single-phase 115/230V, 230/460V, 575V
- Impeller on OC models: Made of Noryl molded with great precision for maximum efficiency.
- Impeller on OCB models: Made of bronze, for pumping liquid at high temperature such as in boiler systems.
MADE in CANADA
-
- Onsite maintenance possible due to an easy access to internal parts
- Built tough for a longer life span
- Constant pumping, even with the presence of air in water
- Double-action piston, single cylinder
- Continuous efficiency at various pressures
- Increased resistance to particles in water
- Priming up to 25 feet (7.62 m)
- Safety valve 100 PSI
- Available in 2 models (S-275, S-600) and 2 versions:
- Complete Pump: pump, motor and pressure switch set at 30/50 lbs/in2
- Pump only: no motor and pressure switch
MADE in CANADA
-
- The convertible PJC model can be used in wells up to 90 feet (27.4M) deep.
- Single-phase 115/230v, 3450 RPM, automatic thermal protection and stainless steel shaft
- 0 – 100 PSI pressure gauge
- Pressure switch set at 30 to 50 lbs/in2
MADE in CANADA
-
- Used for lawn sprinkling systems, irrigation and other applications.
- With its high water capacity, priming is quick and simple (primes up to 25 feet or 7.62M).
- 115/230 V, 230/460 V, 575 V
- Maximum water volume in pump housing assures easy and fast priming.
- Long life assured by non‐corrosive paint and strong construction.
MADE in CANADA
-
- Single-phase 115/230v, 3450 RPM, automatic thermal protection and stainless steel shaft
- 0 – 100 PSI pressure gauge
- Pressure switch set at 30 to 50 lbs/in2
MADE in CANADA
All pumps are tested at the factory
-
The PXP high pressure booster pump is used in a wide range of applications
- Reverse osmosis
- Single-phase 115/230V
- 3 phase 230V, 575V
- Up to 520 PSI
MADE in CANADA
-
Newly rebuild SANDPIPER 1½” (40 MM) S15 air operated dual diaphragm pump. Aluminum body provides superior suction lift of greater than 22 ft (6.7 m).
Designed for outstanding operation, this versatile and mobile pump is perfect for OEM applications.
Equipped to handle abrasive fluids and suspended solids, it gives exceptional performance in harsh chemical applications where reliability is critical.
For more information please check the data sheet here.
-
- Each model has a motor with thermal protection and automatic restart.
- Float not included, sold separately
- Cast iron body
MADE in CANADA
-
- The SSPC pump is one of the most efficient pump on the market.
- The SSPC pump was designed to provide optimal performance in a variety of applications. Specially designed to be easily modified or customized
- Single-phase 115/230V, 230/460V, 575V
- The stainless steel body and impeller assure a longer life span.
MADE in CANADA
All pumps are tested at the factory
-
The Stokes Microvac pumps are self-contained, oil-sealed rotary piston type units. The piston is driven eccentrically around the pump shaft and guides through two floating hinge bars that are free to oscillate in the pump housing.
The exhaust valves are of the corrosion-resistant, heavy duty, poppet type. When the pump is in operation, lubrication of the internal parts is completely automatic. Oil is forced by atmospheric pressure from the reservoir through the oil lines to the shaft bearings.
The oil is then fed into the pump to provide the necessary piston-to-cylinder oil seal. Finally, the oil is forced out through the exhaust valve with the air and returns to the reservoir.
A solenoid valve automatically prevents oil from flooding the pump in the event of a power failure, or when the pump is shutdown without vacuum being broken.
For more information please check the data sheet here.
